Chapter 1: Introduction
Veterinary Vital Signs Monitor Operation Manual 1-1
Chapter 1: Introduction
1.1 About this Manual
T
he
Operation Manual provides installation, operation, and
maintenance
instructions for health-care professionals and other
users
,
trained in
monitoring respiratory and cardiovascular
ac
tivit
y
.
These instructions contain important information for the safe use of the
product. Read the entire contents of these Instructions For Use, including
Warnings and Cautions, before using the monitor. Failure to properly follow
warnings, cautions and instructions could result in death or serious injury to
the patient.
1.2 Using the Manual
The monitor allows you to choose the measurement capabilities you need. A
measured value refers to a derived or calculated value; a parameter refers to
one or more specific measured values. For example, pulse rate and %SpO
2
are
measurements; the oximeter parameter consists of both these measured
values. Operation of the monitor is the same regardless of the number of
parameters you use.
If you are not familiar with the operation of this monitor, follow each chapter
in the manual in order. Each chapter builds on the information from the
previous chapter. If the monitor is already set up, or if you are familiar with its
operation, turn to the chapter that describes the features you will use.
1.3 Definition of Symbols
SYMBOLS
DEFINITION
Attention, see in instructions for use
Type BF Defibrillation
Defibrillator-proof type CF equipment
Freeze Key
To Next Page
Loading...
Need help?
General
