Chapter 9: Non-invasive Blood Pressure
Veterinary Vital Signs Monitor Operation Manual 9-9
1. In the NIBP parameter menu select Venous Puncture.
2. Puncture vein and draw blood sample.
3. Reselect Venous Puncture to deflate the cuff.
During measurement, the NBP display shows the inflation pressure of the cuff
and the remaining time in venous puncture mode.
9.7 Measuring Non-invasive Blood Pressure (NIBP)
9.7.1 Manual NIBP Mode
If you selected MANUAL as the NIBP mode, press the NIBP key on the monitor.
If the measurement is successful, you will see the systolic, diastolic, and mean
arterial pressure values displayed in the NIBP parameter box.
If the measurement is not successful, you will see dashes (- - -) displayed in the
place of the pressure values. You will see a message displayed in the NIBP
parameter box.
9.7.2 Auto NIBP Mode
If you selected AUTO as the NIBP MODE, the first measurement will begin
after the interval time has elapsed.
If the measurement is successful, you will see the systolic, diastolic, and mean
arterial pressure values displayed in the NIBP parameter box. The automatic
measurement interval will be reset, and another measurement will begin as
soon as the interval time has elapsed.
If the measurement is not successful, you will see dashes (- - -) displayed in the
place of the pressure values. You will see a message displayed in the NIBP
parameter box. The automatic measurement interval will be reset.
9.7.3 STAT NIBP Mode
If you selected STAT as the NIBP MODE, the first measurement will begin
immediately and a five-minute timer is started. NIBP measurements are taken
repeatedly until the five minutes have elapsed.
To Next Page
Loading...
Need help?
General
