Chapter 9: Non-invasive Blood Pressure
9-8 Veterinary Vital Signs Monitor Operation Manual
according to the interval you select (2, 3, 5, 10, or 30 minutes, or 1, 2 hours).
The time remaining until the next measurement will be displayed in the
parameter box.
Figure 9.5: Choose NIBP Interval
To choose the automatic NIBP measurement interval:
1. Be sure the NIBP MODE is set to AUTO.
2. On the NIBP parameter menu, highlight INTERVAL and push the knob to
select.
3. Highlight the desired interval (2, 3, 5, 10, or 30 minutes, or 1, 2 hours) and
push the knob to select.
4. Turn the rotary knob to “OK” or “Cancel” to save or delete your settings.
9.6.3 Assist Venous Puncture
You can use the NIBP cuff to cause sub-diastolic pressure. The cuff deflates
automatically after a set time if you do not deflate it.
Figure 9.6: Venous Puncture
To Next Page
Loading...
Need help?
General
