Chapter 4: Setting up the Monitor
Veterinary Vital Signs Monitor Operation Manual 4-7
5. Turn the rotary knob to “OK” or “Cancel” button and push it to save or
delete your settings.
4.5.7 Power Setup
When
the monitor is connected to an AC power source, the frequency should
be set relatively.
Figure 4.7: Power Setup
1. Press the menu key to pop up the main menu and turn the rotary knob to
move the cursor to the “System” option.
2. Push the rotary knob to access the “System” submenu. Turn the knob to
highlight the “Power” option.
3. Push the rotary knob to access the power setup submenu and turn the knob
to highlight the desired frequency and push to select.
4. Turn the rotary knob to “OK” or “Cancel” button and push it to save or
delete your settings.
4.5.8 Language Setup
There are two languages available in this monitor: Chinese and English.
To Next Page
Loading...
