Vacon NXP series - Inverter Unit Section; Drive Sizes FR4-FR8

vacon • 22 Available sections
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
3.5 Inverter unit section
3.5.1 Drive sizes FR4-FR8
The inverter unit section (IUS) includes one or several smaller NXI drives from the VACON
®
NXP
product series. The inverter units are all VACON
®
NXP premium drives.
* Only option board and fieldbus options
**Top exit +400 mm can be shared between two sections
*** Section for cabling with top cabling option (+COT)
As standard the IUS section includes the following (see Figure 6):
1. Input fuses (DC fuses)
2. Fuse switch (IEC FR4-FR6)
3. The NXI drive(s)
4. Control box (integrated into the module)
5. Terminals for control and indication signals
As pre-engineered standard options we can provide the following:
• dU/dt (+ODU)
• Input Switch, DC disconnect (+ISD)
• Arc detection (+ADU)
• Motor fan control (+AMF)
• Motor heater feeder (+AMH)
• Mechanical break control (+AMB)
• Top cabling (+COT)
• UL approved design and components (+NAR)
• Cabinet heater (+ACH)
• Cabinet light (+ACL)
Table 10. Available IUS section sizes FR4-FR8
IUS type Drive size Number of drives/ section Width x Height x Depth (mm)
IUS_4_x FR4*
1-3 400 x 2100 x 605**
4-14 1200 x 2100 x 605**
IUS_6_x FR6 1-2 400 x 2100 x 605**
IUS_7 FR7 1 400 x 2100 x 605**
IUS_8 FR8 1 400 x 2100 x 605**
COT_4-8*** - - 400 x 2000 x 605