Vacon NXP series - Mounting the Cabinets; Fixing the Cabinet to the Floor and Wall

vacon • 32 Installation
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
4.3 Mounting the cabinets
The cabinet should always be fixed to the floor or to the wall. Depending on installation conditions,
the cabinet sections can be fixed in different ways. There are holes in the front and back corners
which can be used for fixing. Additionally, the rails on the top of the cabinet have fixing lugs for fixing
the cabinet to the wall or to another cabinet.
4.3.1 Fixing the cabinet to the floor and wall
If the cabinet is installed against a wall, fix the top of the cabinet to the wall (1) and the front corners
to the floor (2) with bolts.
If bottom-only fixing is used, fix the cabinet to the floor in the front (2) and in the back (3) with bolts.
Fix all the cabinet sections in the same way.
Figure 13. Fixing the cabinet to the wall and floor
2 2 2
11
1
2
3
13861_00