Adapting the appliance to the heating system
Installation instructions geoTHERM 0020051574_04 87
9
Display shown Description Factory setting
I4
Reset? NO
Code 1: 0000 Code 2: FFFF
Codes accepted ? NO
>Select
Reset: Resetting fault messages with consequent
switch-off. All functions currently in progress
are immediately disconnected. The heat pump
starts up again.
b
Caution:
Risk of damage to the heat pump.
Incorrect settings damage the heat
pump.
> On no account must the Code val-
ues be changed.
Code 1/Code 2: Values must not be changed! 0000; FFFF
NO
9.8 Menu I: Displaying general information
To Next Page
Loading...
Need help?
General