Vaisala HMD62 - Connectivity to Vaisala Insight Software

Table 3 HMD62 Measurement Parameters and Default Scaling
Parameter Default Scaling for 4 … 20 mA Output Range
Relative humidity (RH) 0 … 100 %RH
Dew point temperature (T
d
) -40 ... +80 °C (-40 ... +176 °F)
Dew point/frost point
temperature (T
df
)
-40 ... +80 °C (-40 ... +176 °F)
Absolute humidity (A)
0 … 300 g/m
3
(0 … 131.1 gr/ft
3
)
Mixing ratio (X) 0 … 600 g/kg (0 … 4200 gr/lb)
Wet-bulb temperature (T
w
) -40 ... +80 °C (-40 ... +176 °F)
Enthalpy (H) -40 … 1600 kJ/kg (-9.5 ... 695.6 Btu/lb)
TMD62 Measurement Parameters and Default Analog Output
Scaling
Table 4 (page 6) shows the available output parameters and the default analog output
scaling of the parameters for TMD62.
Table 4 TMD62 Measurement Parameters and Default Scaling
Parameter Default Scaling for 4 … 20 mA Output Range
T -20 ... +80 °C (-4 ... +176 °F)
Changing Measurement Parameter Scaling
If your application requires an analog output scaling that
diers from the defaults shown in
Table 3 (page 6) and Table 4 (page 6), you can
configure the scaling by connecting the
transmitter to Vaisala Insight PC software (requires Vaisala USB cable 219690).
2.4
Connectivity to Vaisala Insight Software
The transmitter can be connected to Vaisala Insight software using a Vaisala USB cable (order
code 219690). With the Insight software, you can:
• Calibrate and adjust the measurement.
• See device information and status.
• See real-time measurement.
•
Configure output parameters and scaling.
More Information
‣
Connecting to Insight Software (page 27)
HMD62 TMD62 User Guide M212016EN-A
6