Section 5 - Setup MM147 - D4 Hot Melt Unit
64
Programming Shifts - Continued
This screen states that on Mondays all three shifts (A, B, and C) will be working.
This screen states that on Mondays only Shift A will be working.
After setting all shift times (previous page) and programming the shifts that will be working for each day of the week
(this page), be sure the Clock Function is On and is set properly.
Moving Through the Shift Time/Day Screens
Continue to use the Right/Left, Up/Down,
and OK Buttons to set all shift times and
what shifts work on each day. Turn the
Clock On and your unit is set to work with
your shift times and days.
To Next Page
