Need help?Do you have a question about the Valleylab Force 2 and is the answer not in the manual?
General safety guidelines for electrosurgery equipment use.
Discusses risks of fire and explosion during electrosurgery.
Specific fire risks related to oxygen circuit connections.
Risks associated with unintended radio frequency burns.
Ensuring correct accessory and cable connections for safety.
Safety guidelines for the use of electrosurgical accessories.
Proper application and handling of patient return electrodes.
Precautions to observe during surgical procedures.
Risks from patient contact with grounded metal objects.
Guidelines for safe power level adjustments during surgery.
Ensuring correct placement for patient safety.
Specific hazards and precautions for laparoscopic surgery.
Importance and method of ensuring proper electrical grounding.
Step-by-step guide for preparing the generator for surgical use.
Operational procedures and considerations during surgical procedures.
Guidance on selecting appropriate power levels for procedures.
Procedures to diagnose and resolve REM alarm issues.
Steps for diagnosing and fixing generator 'no output' issues.
Diagnosing and resolving interference with patient monitors.
Steps for handling interference with pacemakers.
General| Type | Electrosurgical Generator |
|---|---|
| Cutting Power | 300 W |
| Coagulation Power | 120 W |
| Maximum Power Output | 300 W |
| Output Power | 300 W |
| Output Waveforms | Cut, Blend, Bipolar |
| Line Frequency | 60 Hz |
| Bipolar Power | 70 W |
| Line Voltage | 100-240 VAC |
To Next Page
