Force 2 User’s Guide
iii
Introduction
The Force 2 PCH generators are designed to provide the three most
significant electrosurgical effects: cutting, desiccation, and fulguration.
The Force 2 generator provides both monopolar and microbipolar
outputs for electrosurgery.
The monopolar outputs are designed with the capability of delivering
smooth cutting, cutting with increasing degrees of hemostasis,
desiccation, and fulguration with minimum cutting. The microbipolar
output is intended for desiccation without fulguration.
The Force 2 PCH generators are designed to provide optimal surgical
performance in procedures requiring relatively low power settings
(e.g., LLETZ, LEEP).
This manual is intended as a user's guide only. Additional technical
information and descriptions are available in the service manual.
To Next Page
Loading...
