Device info
Poll Addr: The device´s HART address.
Manufacturer: Name of device manufacturer (Valmet).
Model: Device name.
Final asmbly num: Field device identification number.
Universal rev: The Universal Device Description ver-
sion supported by the device.
Tag: Text entered by the user, the tag is shown at the
top of the display after the device name.
Message: Text entered by the user.
Descriptor: Text entered by the user.
Sensor Electronics
Sensor type: Sensor model.
Sensor S/N: Sensor electronics serial number.
Sensor HW rev: Sensor electronics revision.
Sensor SW rev: Sensor electronics software revision.
TCU
S/N A: First part of TCU serial number.
S/N B: End part of TCU serial number.
HW rev: TCU revision.
SW rev: TCU software revision.
Cal date: TCU´s final testing date.
Cal ID: Tester´s initials.
Set Clock
Date: The date in mm/dd/yy.
Hours:
Minutes:
Seconds:
12.4. Calibrate
Valmet MCA is calibrated with single-point calibration.
Calibrate menu contains menu items for sample taking
and entering the laboratory value.
In addition, you can perform a level correction on
the measurement, perform various special functions
and view calibration and sample history data:
M C A : M C A - 1 2 3 4
C a l i b r a t e
1 S a m p l e t a k i n g
2 E n t e r L a b
3 L e v e l c o r r
4 F i l l e r
5 L a b c a l H i s t o r y
6 S a m p l e h i s t o r y
7 S p e c i a l f u n c t i o n s
To Next Page
Loading...
