Valor Fires 541 - Installer Guide

Section Heading Page
9. FLUE AND TERMINAL INSTALLATION 25
9.1 Cutting flue to size. 25
9.2 Fitting to wall. 27
9.3 Fitting the terminal guard. 28
10. GAS CONNECTION 28
11. CERAMIC COALS INSTALLATION 29
12. CERAMIC PEBBLES INSTALLATION 31
13. WINDOW FITTING 33
14. FULL OPERATING CHECKS 33
14.1 Check for leaks. 33
14.2 Check control operation. 33
14.3 Checking inlet pressure. 34
15. FASCIA FITTING 35
16. FINAL REVIEW 36
17. SERVICING & PARTS REPLACEMENT 37
17.1 To remove fascia. 37
17.2 To remove window unit. 38
17.3 To remove the ceramic fuel effect and rear wall. 38
17.4 To remove the complete burner module. 38
17.5 To remove the burner from the burner module. 38
17.6 To remove the injector. 39
17.7 To remove the pilot unit. 39
17.8 To remove the gas valve. 39
INSTALLER GUIDE
CONTENTS (Continued)
Page 6
© Baxi Heating U.K. Limited 2010.