CERAMIC FUEL BED REFITTING
The installer and owner guide for the ceramic fuel effect is separate from this guide.
The installer may have attached it to this guide or placed it inside. It is important that
the installer and owner guide for the ceramic fuel effect is followed correctly. If
replacing the ceramic fuel effect, where a new guide is supplied, follow the installer
and owner guide supplied with the replacement fuel effect.
Keep the replacement installer and owner guide with this owner guide for future
reference.
MAINTENANCE
Battery replacement.
This appliance requires one 9V PP3 Ever
Ready Silver Seal (or equivalent) battery.
To replace the battery remove the bottom
front cover casting.
Fit the new battery firmly to the
connections on the ignition block (See
figure 5).
Regular maintenance.
In order to achieve and maintain high
levels of personal safety and performance
efficiency, it is essential that the opening
at the back of the fire and the flue are kept
clear of any form of obstruction. It is
possible that deposits of mortar or soot could fall and accumulate causing the flue to
be blocked or restricted and so preventing proper clearance of dangerous exhaust
fumes.
In the United Kingdom it is the law that a landlord must have any gas appliance, flue
and pipework which is situated in a tenant’s premises checked for safety at least
every twelve months by a competent person (In the UK a GAS SAFE REGISTER
engineer, Outside of the UK a CORGI or GAS SAFE REGISTER engineer).
We recommend that all gas appliances and their flues, wherever situated, are
checked annually.
When fitting replacement parts it is important that only approved parts are
used for maximum safety.
Page 55
© Baxi Heating U.K. Limited 2009.
OWNER GUIDE
Figure 5. Battery fitting
To Next Page
Loading...
