26
Installation
Fuel Beds
Install Driftwood Log Kit 700DWK
Material required
• Traditional Log Kit, which contains:
• 8 logs
• 3 pebbles
• 1 bag of embers
• A steel cover panel
• Gloves, if desired
Installation
Carefully unpack the kit. Note each log has its own
number stamped on the bottom. Some logs have pegs
to help you place them on the burner platform, or other
logs.
Install the logs as shown below.
1. Confi
rm the front edge of the rear log support is
fl ush with the cutout in the burner support
platform.
2. Place log G4 directly on the burner, and slide it all
the way to the left. There is a groove on the
underside of the log that fi ts on the front rail on the
burner.
G4
G11
G12
G13
H20
G14
G4
H18
H21
1
2
14
H1
To Next Page
Loading...
Need help?
General
