33
Installation
Remote Control Holder
Install Remote Control Handset Wall Holder
The remote control kit for this fi replace comes complete
with a wall-mounted holder. This holder is not required
in all installations but is provided as an optional feature
for those customers who wish to mount the remote
handset to the wall.
To install the holder to the wall, fi nd a convenient
location and use the hardware provided with the kit.
IMPORTANT: The location of the remote control handset
is important to assure proper temperature regulation.
To obtain a constant temperature, we recommend that
the handset should be between 3 and 15 feet away
from the appliance but not directly above it. We also
advise that the handset should be located away from
any other heat source and not in direct sunlight as
this may aff ect the temperature sensor located in the
remote handset.
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Switch Plate
Alternative 1
Alternative 2
Alternative 3
To Next Page
Loading...
Need help?
General
