Valor LEX2-S - Remote Control

24
REMOTE CONTROL
NOTE: The remote control handset must be left in the same room as the
appliance because it houses the thermostat that regulates heat output.
Also, when using the APP, the remote must also be in the same room
and have batteries fitted and working to ensure accurate temperature
control.
Remote Control Setup
The communication frequency between the appliance and remote has
already been set up. If you have difficulty with the remote communicating
with the appliance, press and hold the Standby button on the appliance until
you hear two beeps, then release the button. Press the Standby button
on the remote control handset and you will hear one beep. The remote is
connected with the appliance.
T
imer
Battery Power
T
emperature Set
Heating Period
Actual Room
T
emperature
R
OO
M
O
N
4
0
0
.
5
h
O
FF
27
S
ET