28
APP Download Operation instruction
and Video
APP CONTROL
Visit your APP store for iOS or Android to download the C&JsmartFIRE APP.
Or use the QR code on this page. Follow your devices onscreen instructions
to create an account. Once installed, follow the procedure below to pair the
device with your appliance.
1. Start the APP and click “Add Device” on screen. Click “smartFIRE”, then
select WiFi network and enter the password.
NOTE: Your device must also be connected to the same home network
that you wish to connect the appliance to.
2. Ensure the appliance is powered on, then press and hold the WiFi
button on the appliance until you hear 3 beeps at EZ mode. At the same
time, the WiFi indicator and the fuel bed will blink.
3. Follow the instructions on APP to choose the EZ mode and confirm the
indicator is flashing. Click Next and start to add the device. If failed at
EZ mode, try AP mode. Press the WiFi button; you will hear 3 beeps.
Keep pressing until you hear another 5 beeps to enter AP mode, and
then follow the instructions on APP to choose the AP mode and confirm
the indicator is flashing. Click “Go to Connect” and choose a WiFi called
“SmaltLife-XXX” and start to add the device.
We have created a very detailed APP Operation instructions and videos to
guide you through the process of loading the APP, Creating an account,
Pairing your appliance to your smart phone and operate the appliance. Scan
the QR code below or the one on the back of the remote to be taken to the
operation instructions or the videos.
To Next Page
Loading...
