21
Fuel Bed
Once the appliance is in final place, install the fuel bed. It helps to turn the
fireplace’s lights on when placing the logs to highlight their details. See the
appliance’s control panel—page 23—or use the remote control—page
25.
Log Sets
See Accessories section on page 11 of this manual for optional log sets.
If you have purchased a log set, unpack the logs carefully, then place them
according to the instructions provided with the set.
Glass Embers and Vermiculite
Glass embers and vermiculite are provided with the fireplace.
Lay the Glass Embers evenly around the logs to cover the bottom of the bed.
Sprinkle the Vermiculite into the gaps between the Glass Embers.
Reinstall the Glass
In reverse order, reinstall the glass on the fireplace, being very careful when
manipulating it—see page 17 for reference.
1. Slide the glass pane behind the top black strip then push the bottom in
place.
2. Reinstall the glass retaining strip securing it with two screws.
To Next Page
