EasyManua.ls Logo

Valor LEX2-S - Parts and Hardware

Valor LEX2-S
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Firebox (1 pc) ST4*8 Screw (5 pcs) ST5*40 Screw (18 pcs)
ST4*40 Screw (4 pcs) Wall Plug (18 pcs)
Lower Brackets (2 pcs)
(To be used when the wall
hanging bracket is used)
Edging Strips (2 pcs) Edging Strips (2 pcs)
Wall hanging bracket is
attached on rebox (1 pc).
Remove from appliance if
you are not xing to wall.
PARTS AND HARDWARE
1. Unpack the fireplace carefully and make sure that the appliance is intact
with no signs of damage caused by transport and no part has been
exposed to water. If in doubt, do not use the appliance and contact
your retailer.
2. Keep plastic wrapping away from children.
3. Save the original packaging as this may be required in the event of
service complaint with product.
4. Check that all parts are removed from the packing.

Related product manuals