EasyManuals Logo

Valtra T214 User Manual

Valtra T214
414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
Automatic shifting between the speed ranges C and D is possible if you have
activated the C-D shifting automatics functionality in the A–pillar display
transmission settings. Automatic shifting between the speed ranges A and B or B
and C is not possible.
If the C-D shifting automatics are selected and either C or D range is selected in
the Auto1 mode, the automatics shift between the C and D range automatically,
depending on drive speed request, engine load and driving situation. In the Auto1
mode and when driving either in the C or D range, you can prevent the automatic
shifting from D range to C range by pressing the speed range selection + button.
The shifting is prevented for the whole time the button is pressed plus additional
20 seconds after the button is released. Pressing while driving in the C range
shifts to the D range and keeps it selected at least for the duration of the press
plus the 20-second delay, regardless of the engine load, for example.
If the C-D shifting automatics are selected and either C or D range is selected in
the Auto2 mode, the automatics shift between the C and D range when the
engine speed increases above the shifting limit on the C5 gear or decreases
below the shifting limit on the D1 gear.
For example, if the driving speed is 32 km/h (D range) and Auto1 or Auto2 is
selected, the automatics shift the gear to C1 when the driving speed decreases to
0 km/h.
1
2
ECO
GUID-A197B4AF-B673-4EE0-ADC2-B2BB88A2E482
1. Shifting automatics button
2. Selected program
The manual mode is on when the shifting program indicator is not visible.
Press the shifting automatics button to cycle through the manual program
and the Auto1 and Auto2 programs.
The programs change in the following order: manual mode, Auto1, Auto2.
3. Operation
- 118 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Valtra T214 and is the answer not in the manual?

Valtra T214 Specifications

General IconGeneral
TransmissionPowershift
Max Speed50 km/h
Engine Type6-cylinder diesel
Displacement7.4 liters
EngineAGCO Power
Rear Lift Capacity9500 kg
Lift Capacity9, 500 kg
Wheelbase2.995 m
Hydraulic SystemLoad-sensing
Tire OptionsMultiple options available

Related product manuals