Valtra T214 User Manual

4.8.5 Engine
4.8.5.1 Bleeding the fuel system
After changing the fuel filters or if the engine has ran out of fuel the fuel system
has to be bled.
2
1
GUID-647FB64A-BC65-43E4-856B-A428F80A6D02
1. Hand pump
2. Bleeding plug
WARNING: Do not work on the common rail high pressure fuel system
when the engine is running. Wait at least 30 seconds after stopping
the engine. The first high pressure component has to be loosened
slowly, so that the pressure inside the fuel system can adjust to
ambient pressure. If the jet of high pressure fuel contacts your skin,
fuel penetrates the skin causing severe injuries. Get medical help
immediately!
WARNING: Only an authorised person is allowed to repair the fuel
system.
IMPORTANT: Do not use the hand pump when the engine is running. Do not use
any tools or excessive force on the hand pump.
1. Open the bleeding plug.
2. Put a transparent hose in the plug hole and lead it into a suitable container.
4. Maintenance
- 337 -

Valtra T214 Specifications

General

Transmission	Powershift
Max Speed	50 km/h
Engine Type	6-cylinder diesel
Displacement	7.4 liters
Engine	AGCO Power
Rear Lift Capacity	9500 kg
Lift Capacity	9, 500 kg
Wheelbase	2.995 m
Hydraulic System	Load-sensing
Tire Options	Multiple options available