Valtra T214 User Manual

3.12.13.1 Using the drive balance control
AUTO
CONTROL
AUTO
2
3
4
1
GUID-3651DB43-8120-4067-92A6-F1ADAEC6DDF0
1. Drive balance control knob
2. Drive balance position
3. Drive balance control light
4. Lift/stop/lower switch
1. To activate the drive balance control, turn the drive balance control selector
to the drive balance position.
The drive balance control light is lit when the balance control is activated.
2. Set the lift/stop/lower switch to the lift (transport) position.
3. To deactivate the drive balance control, turn the drive balance control
selector to the off position.
3. Operation
- 178 -

Valtra T214 Specifications

General

Transmission	Powershift
Max Speed	50 km/h
Engine Type	6-cylinder diesel
Displacement	7.4 liters
Engine	AGCO Power
Rear Lift Capacity	9500 kg
Lift Capacity	9, 500 kg
Wheelbase	2.995 m
Hydraulic System	Load-sensing
Tire Options	Multiple options available