• Adjust the suspension.
The operator weight display shows the settings for operators of different
weights.
• To increase the suspension, turn the suspension adjustment lever
clockwise.
• To decrease the suspension, turn the suspension adjustment lever
counterclockwise.
• Adjust the height of the seat.
You can lift the seat from the basic position to two higher positions.
• To lift the seat, pull it slowly upwards until you hear a click.
• To lower the seat, pull it up to the top position and then let it drop to the
desired position.
• Fasten the seat belt to the anchor point on the seat.
• Adjust the backrest inclination.
• Pull up the backrest inclination adjustment lever.
• Set the backrest to the desired position.
3.2.2 Adjusting the air-suspended driver's seat
You can adjust the air-suspended driver's seat according to your height and
weight.With these adjustments you can minimise the exposure to vibration, obtain
the best support for your lower back and get the most comfortable driving
position. You may need to change the adjustments according to work conditions
or the components you are using such as the tyre type. Power must be switched
on while adjusting the air-suspended driver's seat, but the seat has its own
compressor. The air-suspended driver's seat is extra equipment.
CAUTION: Do not attempt to adjust the seat while driving. There is an
increased risk of loss of control.
3. Operation
- 64 -
To Next Page
Loading...
Need help?
General
