Valtra T214 User Manual

1
2
3
GUID-BB9AF765-B8EF-4B7D-A1C1-51E93FB56F9C
1. Air pressure system pressure air reservoir
2. Pneumatic brakes pressure air reservoir
3. Automatic water draining valve
1. Push a blunt stick through the draining valve hole.
IMPORTANT: The stick must not be sharp, because it can damage the valve.
If the air that comes out is free of water, the automatic water draining valve is
operating correctly.
2. If there is water with the air, push the stick through the valve hole until there
is no pressure in the reservoir.
3. Open the valve and clean the seal inside it.
4. Mount the valve back.
5. If the valve does not operate properly after cleaning, replace it with a new
valve.
6. Follow the same procedure for the other pressure air reservoir.
4. Maintenance
- 310 -

Valtra T214 Specifications

General

Transmission	Powershift
Max Speed	50 km/h
Engine Type	6-cylinder diesel
Displacement	7.4 liters
Engine	AGCO Power
Rear Lift Capacity	9500 kg
Lift Capacity	9, 500 kg
Wheelbase	2.995 m
Hydraulic System	Load-sensing
Tire Options	Multiple options available