Valtra T214 User Manual

4
5
6
1
2
3
GUID-3396B664-6140-46DE-9A14-D68094FD1B08
1. Ignition switch
2. Ignition key
3. OFF position
4. ACC position
5. Power on position
6. Start position
•
Turn on the power by turning the ignition key from the (OFF) position to
the (power on) position.
In cold conditions, when the engine is cold, the glow indicator light on the
instrument panel is lit.
• Start the engine by turning the ignition key from the (power on) position to
the (start) position after the glow indicator light on the instrument panel
has gone out.
• Stop the engine by turning the ignition key to the
(ACC) position.
•
Turn off the power by turning the ignition key to the (OFF) position.
First, stop the tractor, apply the parking brake, check that the parking brake
symbol (P) is lit on the instrument panel, and then turn off the power.
The tractor and several movements of the implements can be stopped if a
fault occurs by turning the ignition key to the (OFF) position. This will
make the engine stop and the transmission disengage, and the movement of
the linkage stops.
WARNING: Do not turn the ignition key to the
(OFF) position
when the tractor is moving unless it is unavoidable.
WARNING: When the power is off, the emergency brake is not in
use and the engagement of the parking brake can be delayed.
IMPORTANT: Do not keep extra keys on the same bunch with the ignition
key. It is possible that your knee touches them and turns the power off.
3. Operation
- 75 -

Valtra T214 Specifications

General

Transmission	Powershift
Max Speed	50 km/h
Engine Type	6-cylinder diesel
Displacement	7.4 liters
Engine	AGCO Power
Rear Lift Capacity	9500 kg
Lift Capacity	9, 500 kg
Wheelbase	2.995 m
Hydraulic System	Load-sensing
Tire Options	Multiple options available