VAMP 135 - Analog Output Ma OUTPUT; Disturbance Recorder Menu RECORDER

VAMP 135 Over-, under-, residual voltage and
frequency relay
Operation and configuration
VAMP Ltd
24
VAMP 24h support phone : +358 (0)20 753 3264 VM135.EN008
5.9. Analog output mA OUTPUT
Via the submenus of the mA OUTPUT menu the following
functions can be read and set:
• Analog output reading / editing a forced value (AO)
• Enabling / disabling of forced control of the analog output
(FORCE)
• Choosing the coupling of analog output (Link)
• Setting the coupling minimum value (Min)
• Setting the coupling maximum value (Max)
• Setting the analog output minimum value (AOmin)
• Setting the analog output maximum value (AOmax)
Available couplings to analog output
• U12, U23, U31, Uline
• UL1, UL2, UL3
• U
0
, U2/Un
• f
• DI, DO
5.10. Disturbance recorder menu
RECORDER
Via the disturbance recorder menu the following functions can
be read and set:
• Recording mode (Mode)
• Sample rate (Rate)
• Recording time (Time)
• Pre trig time (PreTrig)
• Scroll list of active links (Links)
• Add a link to the recorder (AddLink)
• Clear all links (ClrLink)
• Manual trigger (MnlTrig)
• Count of ready records (ReadyRec)