VAMP Ltd
Over-, under-, residual voltage and
frequency relay
Operation and configuration
VAMP 135
VM135.EN008 VAMP 24h support phone : +358 (0)20 753 3264
25
5.11. Service menu SERVICE
Via the submenus of the Service menu the following functions
can be read and set:
Relays
•
Enabling / disabling of forced control of the output
relays (FORCE)
•
The status of the output relays (T1 and T2, A1 – A3
and IF)
•
The forced control of the output relays (T1 and T2, A1 –
A3 and IF)
Setup
•
Setup of screen brightness (Bright)
•
Setup of screen scroll delay (ScrlDelay)
•
Changing of password (ChgPwd)
•
Changing of date, time and date style(Date, Time,
Style)
DeviceInfo
•
Serial number of the device (SerN)
•
Software version (Prgver)
To Next Page
Loading...
