Varian archon - Page 3

ii
3 Keypad Definition & Layout / Screen Display 3-1
3.1 General 3-1
4 Operation Keys 4-1
4.1 Auto Key 4-1
4.2 Manual / Priority Sample Key 4-2
4.2.1 Running a Priority Sample During an AutoRun. 4-2
4.3 Flush Key 4-3
4.3.1 Drain Sparge Tube 4-4
4.3.2 Flush Syringe 4-4
4.3.3 Rinse Sparge Tube 4-4
4.3.4 Backflush Water Probe 4-5
4.4 Pause / Stop Key 4-5
4.5 System Hold 4-5
5 Method Setup 5-1
5.1 Method Editing 5-1
5.2 Sample Method Parameters 5-1
5.3 Blanks After Vial Editing 5-5
5.4 Method Programming Guidelines 5-6
5.4.1 Water Method Program 5-6
5.4.2 Soil Method Program 5-6
5.4.3 Blank Method Program 5-7
5.5 Equilibrium Count and Equilibrium Time 5-7
5.6 Operating Sequence Steps 5-8
5.6.1 Water Sample Sequence 5-8
5.6.2 Soil Sample Sequence 5-10
5.6.3 Blank Sample Sequence 5-11
6 System Setup 6-1
6.1 Front Park 6-1
6.2 System Status 6-1
6.3 Maintenance 6-2
6.3.1 Standard Control 6-2
6.3.2 Adjust Counters 6-3
6.3.3 Shipping Position 6-3
6.3.4 Clean Syringe 6-4
6.3.5 Elevator up/down 6-4
6.4 System Calibration 6-4
6.4.1 Calibration Test 6-4
6.4.2 Auto Calibrate 6-5
6.4.3 Vial 22 Position 6-8
6.4.4 Water Probe Vial Position 6-8