03-914642-00:6
iii
6.4.5 Equilibrium Block 6-9
6.4.6 Knockoff Clearance 6-9
6.4.7 Standard Clearance 6-10
6.4.8 Manual Calibration: Coordinate Settings Menu Items 6-11
6.5 System Diagnostics 6-12
6.6 System Settings 6-14
6.7 System Options 6-16
7 Maintenance 7-1
7.1 Removal and Replacement of the Needle Sparge or SoilVial Probe 7-1
7.2 Removal and Replacement of the Water Probe 7-3
7.3 Cleaning the Soil Transfer Line Frit (PN DY-505599-00) 7-4
7.4 Replacement of the Water Line Screen (P/N DY-505598-00). 7-4
7.5 Replacement of the Soil Transfer Line (Nickel Line Only) (DY-505745-00) 7-4
7.6 Replacement of the Soil Purge Gas Needle (DY-505463-00) 7-5
7.7 Cleaning the Vial Gripper 7-5
7.8 Leak Check Helium Purge Gas Flow 7-5
7.9 Replacement of the Heated Upper Soil Valve 7-6
7.10 Sample Stir Motor Speed Adjustment 7-7
7.11 Drip Pan Cleaning 7-8
7.12 Cleaning or Replacing the Syringe Plunger O-ring 7-8
7.13 Cleaning the Internal Standard Valve and Lines 7-10
7.14 Installation of the Internal Standard Vials 7-11
7.15 Shipping Instructions 7-12
8 Remote I/O Cable Hookup Instructions 8-1
8.1 Archon to Tekmar LSC-2000 and 3000, P/N DY-505872-00 8-2
8.2 Archon to Tekmar 3000 with HP 5890, P/N DY-505869-00 8-3
8.3 Archon to Tekmar LSC 2000/3000 with Varian 3400/3600 8-4
8.3.1 Varian GC Motherboard Attachments – J16 and J32 8-5
8.3.2 J-16 Splitter DY-700030-00 8-5
8.3.3 J-23 Splitter DY-700031-00 8-5
8.4 Archon to Tekmar LSC 2000 / 3000 with HP 5895/96/85/87/88/92 8-7
8.5 Archon to Tekmar LSC 2000 / 3000 with HP 5890 w/5970/71/72 8-9
8.6 Archon to Tekmar LSC 2000 / 3000 to HP 6890, P/N DY-505873-00 8-10
8.7 Archon to OI 4460/4560 with HP 5890, P/N DY-505871-00 8-11
8.8 Archon to OI 4460 / 4560 with Varian 3400/3600, P/N DY-505870-00 8-12
8.9 Archon to OI 4460 / 4560 to HP 5890, RTE HP 1000 GC / MS Software 8-13
8.10 Archon to Tekmar 2000/3000 with Varian 3800, PN 03-925673-01 8-14
To Next Page
Loading...
