VAT PLUTO Series User Manual

Volta Air Technology Owner’s Manual
Van Refrigeration & Freezer Unit
26
CONFIDENTIAL
• Place condenser on roof and ensure measured holes line up, adjust where necessary
• Make sure rubber isolator strips are in place under the condenser plate
• There is a white plastic hole cover in
the installation kit, apply silicone or
sealant underneath and around the
cover and press to fit on the opening.
• You can secure the cap in place using
self-tapping screws until sealant cures.
• Wait for sealant to dry before running
refrigerant hoses

VAT PLUTO Series Specifications

General

Brand	VAT
Model	PLUTO Series
Category	Refrigerator
Language	English