EasyManua.ls Logo

VAT PLUTO Series - Energy Pack Connection

Default Icon
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Volta Air Technology Owner’s Manual
Van Refrigeration & Freezer Unit
37
CONFIDENTIAL
Energy Pack Connection
Ensure negative is connected properly to main negative terminal block
Attach the positive wire from the energy pack to main positive terminal block
Make sure all the connections on the terminal block are tight
NOTICE
Avoid mounting in an enclosed small box or compartment. The controller may
over heat without proper ventilation
WARNING!
1
When attaching ensure tool does not touch pipes or any metal that is
grounded to the vehicle. Will cause short and could damage the energizer or
fuses.
Keep wires away from excessive heat sources (exhaust lines) or sharp
corners. Ensure properly secured and wire loomed.