EasyManua.ls Logo

VAT PLUTO Series - Evaporator Unit

Default Icon
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Volta Air Technology Owner’s Manual
Van Refrigeration & Freezer Unit
13
CONFIDENTIAL
Evaporator unit
The evaporator unit is mounted inside the insulated compartment and circulates the cold air. It
is connected to the condenser unit with 3 refrigerant lines; suction, liquid, and hot gas. Also, it
needs to be connected to a water drain to allow the condensed water out of the cooled area.
The evaporator unit consists of; evaporator coil, TXV (thermostatic expansion valve), cooling fans,
air and defrost temperature sensors, and CPR (compressor pressure regulating) valve.
Item
Description
Part ID
1
Evaporator base plate
PLT007
2
Evaporator coil
REC002
3
Defrost temperature sensor
TSE002
4
Thermostatic Expansion Valve (TXV)
TXV002
5
Liquid line port SAE 5/8
-
6
Hot gas port SAE 5/8
-
7
Suction port SAE 7/8
-
8
CPR valve
CPR001
9
Evaporator fan DC 12V 5A
FAN008
10
Air temperature sensor
TSE001
11
Evaporator cover
COV007
12
Condensed water drain
-
13
Stainless steel bolt & washer - M6x25mm
BLA001