4. Imaging System Overview
Green Smart User Manual 37
ENGLISH
4.6.5 Enclosed Components
The enclosed components can be disassembled and cleaned. All enclosed components
that are used to support the patient (the Bite, the Chinrest, the Ear Rods, and the Temple
Supports) should be cleaned with ethanol and wiped with clean towels.
Components Name and Function Materials
Normal Bite
: For PANO and CBCT normal
patients
PC (Polycarbonate)
Special Bite A
: For PANO TMJ and Sinus
modes
: For CBCT TMJ patients
PC (Polycarbonate)
Special Bite B
: For PANO edentulous patients
PC (Polycarbonate)
Normal Chinrest
: For Normal Bite
ABS (Acrylonitrile butadiene
styrene) copolymer
Special Chinrest
: For Special Bite A and Special
Bite B
ABS (Acrylonitrile butadiene
styrene) copolymer
Temple Supports (1 set)
PC (Polycarbonate)
Ear Rods (1 set)
Silicone
Nasal Positioner Cover
: For CEPH
Silicone
Carpus Plate
PC (Polycarbonate)
Sanitary Vinyl Covers
(disposable) for the Bite
LDPE (Low-density
polyethylene)
Protractor (1 set)
: For positioning the patient’s
body in CEPH mode.
PC (Polycarbonate)
Model Scan Jig
ABS (Acrylonitrile butadiene
styrene) copolymer