Operating & Mounting instructions – 8 074 143.03/03 – Appendix A7
No. Parameter name Factory default Setting Page
C085
Standardization of thermistor input Default 45
C086
AM analog offset Default 57
C087
AMI analog adjustment 50 57
C088
AMI analog offset Default 57
C101
Reference up/down selecteion 00 45
C102
Reset function selection 00 45
C103
Reset restart function selection 00 45
C121
Offset-adjustment 0...10 V input Default 22
C122
Offset-adjustment 4...20 mA input Default 22
C123
Offset-adjustment -10...+10 V input Default 22
H-Parameters
No. Parameter name Factory default Setting Page
H003
Motor kW rating Default 53
H203
2nd Motor kW rate Default 55
H004
Motor poles 4 53
H204
2nd Motor poles 4 55
H006
Motor stabilisation constant 100 53
H206
2nd Motor stabilisation constant 100 55
P-Parameters
No. Parameter name Factory default Setting Page
P001
Option 1 Selection on error 00 58
P002
Option 2 Selection on error 00 58
To Next Page
Loading...