P001
Option 1 Selection on error VIC 00 or 01 00
P002
Option 2 Selection on error VIC 00 or 01 00
This parameter defines, if an error in the connection with the option cards leads a trip message or
not.
Setting Function
00 Error
01 No error
C070
Data command VIC 02 to 05 02
C071
Transmission speed VIC 02 to 06 04
C072
Identification code VIC 1...32 1
C073
Data bits VIC 7 or 8 7
C074
Parity VIC 00 to 02 00
C075
Number of Stop bits VIC 1 or 2 1
C078
Waiting time VIC 0...1000 ms 0
Parameters C070...C078 allow the configuration of the serial interface RS485.
Serial communication
Communications
To Next Page
Loading...
General