Vatech PHT-30CSS - Page 89

6. Completing Miscellaneous Works
vatech A9 (Model: PHT-30CSS) Installation Manual 79
English
Base Top Cover Rear
Required Tool
Cross Head
Screwdriver w/
Magnetic Tip
L = 200 mm (7.9”)
Parts and
Accessory
Base Top Cover
Rear
-
Pan Head Screw
M4 x 6 – 4 pcs
(Part No. 27)
Silicon Cap
(White)
4 pcs
(Part No. 16)
1. Assemble the Base Top Cover Rear in the Column Unit's back with two truss bolts
and a screwdriver. (see below)
2. Put a silicon cap (white) into each hole to complete the step.