13.2,
MANUALLY RINSING THE UNIT.
At the end of the work shift, each unit has to be cleaned with the blind filter.
• Remove the filter holder (1) from the unit (2) and empty out the coffee grounds.
• Remove the filter from the filter holder and mount the blind filter (3) provided.
• Pour specific detergent for coffee machines into the blind filter (3) (for the amount, see manufacturer’s instructions).
• Start the machine as described in the relative paragraphs.
• Mount the filter holder (1) with the blind filter on the unit (2).
• Simultaneously press the buttons “ ” (4) and “ ” (5) to start the self-cleaning cycle during which the machine will
automatically dummy dispense 5 times bringing the pump to a pressure of 9 bar (0.9 MPa).
• Remove the filter holder (1) from the machine and empty out the product.
• Remount the filter holder (1) with the blind filter on the machine and repeat the cycle as described above.
• Remove the filter holder (1) from the machine and remove the blind filter.
• Remove the filter holder (1) from the unit (2), remove the blind filter and remount the filter.
• Dispense two coffees to remove any unpleasant flavours.
Manuale_Replica2B Elettronica_Rev0_5lingue_03-2016.indd 42 19/04/16 17:29
To Next Page
Loading...
