FILTER ALARM AND RESET
• When the following message is shown on the display:
WATER FILTER
02 66 01 66 91
= it means that the value set for the number of litres the filter can purify has been
exceeded (set by the authorised technician during programming).
To reset this alarm, simultaneously press and hold down the buttons “ ”
and “
”.
The display shows:
FILTER RESET
.
MAINTENANCE ALARM AND RESET
• When the following message is shown on the display:
MAINTENANCE
02 66 01 66 91
= it means that the value set for the number of dispensing cycles the machine can
perform has been exceeded (set by the authorised technician during programming).
To reset this alarm, simultaneously press and hold down the buttons “ ”
and
“
”.
The display shows:
MAINTENANCE RESET
.
In the event of other malfunctions, immediately turn off the machine and pull the plug from the socket. Call the
Authorised Service Centre.
Manuale_Replica2B Elettronica_Rev0_5lingue_03-2016.indd 48 19/04/16 17:29