12,
OPERATION.
12.1,
PREPARING THE MACHINE.
• Check that the water supply tap upstream of the machine is open.
• Start the machine by turning the switch (1) to “ ”.
• The water in the boiler will automatically start heating up indicated by the LED
(2) coming on.
• Wait until the set temperature has been reached indicated by the LED (2) going
off; the pressure indicated on the pressure gauge (3) must be about 1 bar (0.1
MPa).
• Turn the switch (1) to “ ” to start operation of the cup heating plate heating
element; the LED (4) will come on.
• Place the filter holders in the relative units.
• Position the cups possibly facing up.
WARNING: Only cups, mugs and glasses and no other objects may
be placed on the cup heating plate.
Dry the objects before placing them on the cup heating plate.
Manuale_Replica2B Elettronica_Rev0_5lingue_03-2016.indd 35 19/04/16 17:28
To Next Page
Loading...
