3,
MACHINE DESCRIPTION.
The main features of the semiautomatic espresso coffee machine with lever-controlled dispensing are listed below.
• Copper steam boiler with heat exchanger for preheating the water intended for the coffee boilers and for producing hot water
and steam.
• 2-3 copper hot water boilers for dispensing coffee with settable temperatures.
• NTC temperature sensors to measure/control the coffee dispensing temperature.
• Boiler filling by means of a rotary pump that is automatically activated when the machine is turned on.
• Service boiler water level sensor.
• Service boiler heating element immersed in the boiler water that allows heating the water and producing steam.
• Coffee boiler heating elements immersed in the boiler water that allow heating the water intended for coffee dispensing.
• Dispensing units in chrome-plated brass.
• Rotary pump.
• Steam nozzle in stainless steel with steam dispensing handwheel.
• Direct connection to the water mains for filling and emptying.
• LEDs to indicate when the machine and the electric cup heating plate are on.
• Pressure gauge to indicate the pump operating pressure.
• Pressure gauge to indicate the service boiler operating pressure.
• Pushbutton panels with 6 buttons for coffee and hot water dispensing.
• Digital display for setting and viewing the machine operating parameters.
Manuale_Replica2B Elettronica_Rev0_5lingue_03-2016.indd 13 19/04/16 17:28
To Next Page
Loading...
