EasyManua.ls Logo

VBM REPLICA 2B - Page 108

VBM REPLICA 2B
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
ENG
Cause Solution
Coffee overflows from the edges
of the filter holder.
There is dirt in the filter holder seat that
prevents the coffee from coming out of the
spout.
Clean.
Unit gasket worn out. Replace.
Spray heads clogged. Clean or replace.
The coffee is too cold.
Machine not ready. Wait until it reaches the operating temperature.
Coffee is not dispensed or
dispensed too slowly.
Unit/s off. Turn on the units.
Insufficient water supply. Check the supply line.
Dispensing hole of the filter holder clogged. Thoroughly clean the filter holder with specific
detergent and using a toothpick.
Too fine grinding. Adjust the grinder/doser.
The machine does not dispense
steam.
Dispensing nozzle clogged. Clean.
Dispensing ducts obstructed. Call a technician to descale the machine.
Faulty steam tap. Call Technical Service.
The machine does not dispense
hot water.
Faulty dispensing solenoid valve. Call Technical Service.
Dispensing ducts obstructed. Call a technician to descale the machine.
Manuale_Replica2B Elettronica_Rev0_5lingue_03-2016.indd 50 19/04/16 17:29

Table of Contents

Related product manuals