Rev. C Dimension 3100 Manual 4-63
Chapter 4 Installation
4.1 Overview
This chapter details the installation procedure for the Dimension 3100
Scanning Probe Microscope (SPM) system from receiving to full installation.
Specifically, the following topics are discussed in this chapter:
• Overview: Section 4.1
• Shipping and Receiving: Section 4.2
• Uncrating the System: Section 4.3
• Installing the Dimension 3100 System: Section 4.4
• Connecting the Dimension 3100 System: Section 4.5
• System Power-up: Section 4.6
CAUTION: Installation should be completed by trained Digital
Instruments Veeco personnel only. Installation instructions
are provided for customer reference only.
To Next Page
Loading...