4 Diagnostics Mag Sensor
4-2
AVAILABLE LINE PRESSURE SENSOR DIAGNOSTIC REPORTS
•
General (general diagnostic information)
• Communication (communication diagnostic information)
• Constants (constants diagnostic information)
• Channel (channel data)
Mag Sensor
The Mag Sensor diagnostics contain reports on the activity and condition of Mag Sensors.
AVAILABLE MAG SENSOR DIAGNOSTIC REPORTS
•
General (general diagnostic information)
• Communication (communication diagnostic information)
• Constants (constants diagnostic information)
• Channel (channel data)
Meter
The Meter diagnostics contain information on meter events and enables mapping of a tank to meter.
AVAILABLE DIAGNOSTIC SCREENS
•
Manual Mapping - The Manual Mapping diagnostic screen will help you assign meters to tanks with small
volume dispensing events and to identify post-blend metering. This screen displays active events as they are
reported by the POS terminal.
• Meter Events - The Meter Events screen lists up to one page of time-ordered meter start/stop events.
• Tank Map - This screen displays the meter-to-tank map. This is the screen you want to use to verify meter
mapping, or to view if the site should go unmapped, suspending BIR.
Miscellaneous
The Miscellaneous diagnostics contain information on power up and power down events.
AVAILABLE MISCELLANEOUS DIAGNOSTIC REPORTS AND SCREENS
•
Power Reset History Report - (Power up and power down timestamps).
Module
The Module diagnostics contain information/diagnostics about modules.
To Next Page
Loading...
