Veeder-Root TLS-450PLUS - Figure 7-4. Remove Ground Wire from Ack Switch;Display Door; Figure 7-5. Remove Top and Bottom Optional Display Door Hinge Screws

7 Component Removal Removing The Ack Switch Panel/Display (Right) Door And CPU Board
7-4
Figure 7-4. Remove Ground Wire From Ack Switch/Display Door
5. Remove the TLS-450PLUS Ack Switch Panel/Display door by removing the top and bottom hinge shoulder
screws (see Figure 7-5).
Figure 7-5. Remove Top And Bottom Optional Display Door Hinge Screws
6. Remove the USB module cables from the CPU board (two USB cables - top pointers; Wireless cable - bottom
pointer) (see Figure 7-6).