KC 0016 VEMAG
0870149431 / 130422 Seite 9
EC-Declaration of Conformity
Note: This Declaration of Conformity and the -mark affixed to the nameplate are valid for the vacuum pump within the Busch-scope of delivery.
When this vacuum pump is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating
company, too) must be conduct the conformity assessment process acc. to the Directive Machinery 2006/42/EC for the superordinate machine,
issue the Declaration of Conformity for it and affix the -mark.
For maintenance of this Declaration of Conformity of vacuum pumps without a drive may only be used a drive with awritten consent of Busch.
We
Busch Produktions GmbH
Schauinslandstr. 1
79689 Maulburg
Germany
Declare that the vacuum pumps KC 0016 VEMAG
In accordance with the European Directives:
− “Machinery” 2006/42/EC,
− “Electromagnetic Compatibility” 2004/108/EC,
Have been designed and manufactured to the following specifications:
Standard Title of the Standard
Harmonised Standards
EN ISO 12100-1
EN ISO 12100-2
Safety of machinery - Basic concepts, general principles of design - Part 1 and 2
EN ISO 13857 Safety of machinery - Safety distances to prevent hazard zones being reached ba the upper and lower limbs
EN 1012-1
EN 1012-2
Compressors and vacuum pumps - Safety requirements - Part 1 and 2
EN ISO 2151 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 61000-6-1
EN 61000-6-2
Electromagnetic compatibility (EMC) - Generic immunity standards
EN 61000-6-3
EN 61000-6-4
Electromagnetic compatibility (EMC) - Generic immunity standards
Manufacturer
Dr.-Ing. Karl Busch
General Director
Person authorized to compile
the technical file
Andrej Riwe
Technical writer
Maulburg, 22.04.2013
To Next Page
