VEMAG HP30E - Page 63

HP25E / HP30E 6. Graphical control
6-17© VEMAG 2018
6.5.4 Select start/stop method
In the Start/stop method eld you can select the start/stop method and
the attachments used.
• Press the Start/stop method key.
• Select the Start/stop method eld using the cursor key.
• Press Enter. A list of the possible start/stop methods is displayed.
• Select the start/stop method using the cursor keys.
• Press Enter.
• Select the Attachment / Optional eld using the cursor key.
• Press Enter. A list of the possible attachments / options is displayed.
• Select the attachment / option using the cursor keys.
• Press Enter.