G-4
04/2005
NOTE: The Model number of the vending machine is located on the top, left hand corner
of the serial plate. A typical model number could read “320GFT001”. The 320 is the model
number, GFT represents the product line of the vendor, and the remaining digits tell what
options are included.
MODEL
SERIAL NO.
MFD IN U.S.A. BY SANDENVENDO AMERICA, INC., DALLAS, TX
DESIGN PRESSURE - PSIg
LOW SIDE 103 HIGH SIDE 316
CHARGE OZ. R-134a AMPS
APPROVED FOR INDOOR USE ONLY
VOLTS
CYCLE
PHASE
105/115
50/60
1
BASIC
UNIT
POWER REQUIREMENTS
REFRIGERATED
VENDING MACHINE
239L
FIGURE 1