Vendo VUE 30 - VEC 15 Controller Programming

P-2
03/2006
VEC 15 PROGRAMMING OPERATION
The VEC 15.1 Controller uses a 4-button programming system:
Programming Buttons: # 1 – Exit/ Home
# 2 – Increase/ Advance
# 3 – Decrease/ Backup
# 4 – Enter/ Save
To access Mode functions, open the door. Locate the Mode Button on the Main Control Board
and press until Diagnostics appears. Use selection button 2 or 3 to navigate through the modes.
The Modes are as follows:
Diagnostics
Coin Payout
Tube Fill
Test Mode
Calibration
Cash Data
Sales Data
Discount Counter*
Free Counter*
Set Price
Conguration
Door Closed Password
Set Language
Set Clock **
Lighting **
Refrigeration ***