Vendo VUE 30 User Manual

P-28
03/2006
Custom Message:
The custom message feature allows the operator to program a 2 line X 20 character message.
Note:
1. Press Button 1 to make a space between words.
2. The message cannot be saved until all the characters on the top line have been entered.
1. Press Button 4 at Custom Message – Enable On/Off
2.PressButton2–On/Offashes
3. Advance on Button 2 to On
4. Press Button 4 to ‘save’ setting
5 Advance on Button 2 – current messages displays
6. Press Button 4 – 1
st
characterashes
7. Press Button 2 to advance to desired character
8. Press Button 4 to ‘save’ character – immediately advances to next character
9. Continue setting message using steps outlined above
10. Press and hold Button 1 for 3 seconds to save the message and exit mode
Return:
Exits the programming mode and returns the vendor to stand-by

Vendo VUE 30 Specifications

General

Brand	Vendo
Model	VUE 30
Category	Vending machines
Language	English